Leather Cuff Bracelet

The other day I shared about a lady who made jewelry out of old bicycle tubes and I told you I would be trying it with the recycled leather I got from SCRAP. Well I gave it a try, was hoping to have a cute bracelet for my daughters birthday with a C cut out in the middle. But I found out quickly that you cant really do large cut outs or it flaps open. I also found out it is hard to cut the leather, making the cut out C look very scrappy. So I scraped that one and started another one and the second one turned out pretty good.

I started with a pink piece of leather. I measured my daughters arm and cut it to that length.

I used a razor blade to cut the C out after I traced it onto the leather. Make sure and have a cutting board under the leather.

I also used the hole punch from my sisters handy dandy crop-A-Dile. But then I scraped this one.

And made this one!

I used two small eyelets on each side, along with two strips of leather for the closure.